Bay Networks Manager, User Manual

Page: 368 / 488

am.book : ch22 4 Tue May 6 13:24:47 1997
Annex Manager User Guide
Chapter 22 Annex Parameters
22-4
Part 5 Reference Information
anxt1ChanSigProto indicates the inbound and outbound signalling protocols supported by each DS0
T1 channel.
anxt1ds1LineBuildout contains the cable loss measurement, in decibels, between the last T1 signal
regenerator and your location. This measurement is supplied by the telephone
company at installation. You need to adjust your buildout based on this
measurement.
anxt1Dsx1LineType
indicates the variety of DS1line implementing this circuit. The type of circuit
affects the number of bits per second that the circuit can carry, as well as the
usage and error statistics.
anxt1SwitchType
selects the switch type compatible with the PRI provider.
Type
T1 DS0
Values
wink_in, wink_out, wink_bi, loop_in, loop_out, loop_bi,
ground_in, ground_out, ground_bi, immediate_in,
immediate_out, immediate_bi
Default
loop_bi
Lists DSO Channel, T1_DS0
Type
WAN Module
Values
0_db, 7.5_db, 15_db, 22.5_db
Default 0_db
Lists
DS1 Line, PRI_Line, T1_DS1
Type
WAN Module
Values
ESF, D4, DDF, MFF_CRC4, MFF_CRC4-G706
Default ESF
Lists
DS1 Line, PRI_Line, T1_DS1
Type WAN Module
Values
att5ESS, ni2, dms100, at9, ets, au1, kr2, ntt, ets-ncrc4,
us_t1, hk_t1, tw_t1, gen_e1, at4, br_e1, ko_e1, sweip7,
default, other.
Default
att5ESS
Lists
T1 Line, PRI_Line, T1_DS1