am.book : ch16 11 Tue May 6 13:24:47 1997
16-11
Chapter 16 Viewing and Changing Parameters
Annex Manager User Guide
Part 3 Customize Mode
Reading the Message Box
The message box monitors
Set
operations. It includes:
•
The name of the operation surrounded by asterisks.
•
A status message confirming the current operation.
Setting the
following parameters
is the status message in
Figure 16-2
.
•
All parameters included in the group or all parameters you
selected.
•
The
Set values complete
message indicating that processing is
complete.
•
Current values when the
Set
operation ends. Annex Manager
performs a
Show
operation automatically on the marked
parameters to confirm your changes. Messages related to this
operation appear in the box.
Message boxes contain error messages if you enter incorrect values, if
Annex Manager cannot find values for parameters, if the process times
out and Annex Manager cannot set values for all marked parameters, or
if you enter an incorrect format for fields that require an integer or an IP
address. For more information, see
Identifying Errors
on page 16-16.
Using Push Buttons
Set
provides the following push buttons:
•
changes values for marked parameters. The
message box reflects this operation and provides error
messages if necessary. The
Confirmation
window allows you to
verify the
Set
command. If you selected the
Confirm Auto Reset
option and parameters that require an Annex reset, the
Reset
Parameters
window follows.
Apply
Summary of Contents for Manager
Page 10: ...am book amTOC doc x Tue May 6 13 24 47 1997 Annex Manager User Guide Contents x ...
Page 14: ...am book amLOF doc xx Tue May 6 13 24 47 1997 Annex Manager User Guide Figures xx ...
Page 16: ...am book amLOT doc xxii Tue May 6 13 24 47 1997 Annex Manager User Guide Tables xxii ...
Page 22: ...am book pref xxviii Tue May 6 13 24 47 1997 Annex Manager User Guide Preface xxviii ...
