Bay Networks Manager, User Manual

Page: 468 / 488

am.book : ch22 104 Tue May 6 13:24:47 1997
Annex Manager User Guide
Chapter 22 Annex Parameters
22-104
Part 5 Reference Information
vcli_groups specifies which remote group code is assigned to virtual CLI users. All virtual
CLI users have the same group code. You can enter
all
to enable all groups,
none
to disable all groups, a series of numbers separated by commas (e.g.,
1
,
5
,
7
), or
a range of numbers separated by dashes
(e.g.
1, 5, 200-255
).
vcli_password
defines a password required for virtual CLI connections to the Annex and as a
back-up to host-based security. This parameter serves as host-based security
backup: the Annex requests a password on a virtual CLI connection if the security
server does not respond. For local password protection, you can set
enable_security
to
enabled
, choose
disabled
for
vcli_security
, and enter a
password here.
vcli_security
controls user validation on virtual CLI connections to and from an Annex. If you
choose
enabled
, the Annex enables connection security for all virtual CLI
connections and executes the same user validation, including user name and
password, that it uses with CLI security on asynchronous ports. This parameter
works with host-based security only if you set
enable_security
to
enabled
.
Type
Annex
Values
all, none, numbers between 0 and 255
Default none
Lists
Annex Only, LAT
Type
Annex
Values
0 to 15 characters
Default unset
Lists
Annex Only, Security, Virtual CLI
Type Annex
Values
enabled or disabled
Default
disabled
Lists Annex Only, Security, Virtual CLI