Bay Networks Manager, User Manual

Page: 416 / 488

am.book : ch22 52 Tue May 6 13:24:47 1997
Annex Manager User Guide
Chapter 22 Annex Parameters
22-52
Part 5 Reference Information
input
_stop_char
defines the control character sequence that stops input if
input_flow_control
is
set to
stop/start
.
ip_forward_broadcast allows an Annex to broadcast a packet to the SLIP or PPP interfaces. When an
Annex receives a packet sent to a broadcast address (except 0.0.0.0 and
255.255.255.255), it scans the interface list for SLIP or PPP and matches the
broadcast address against the remote address of the interface using a subnet or
net mask. If these addresses match, the Annex copies the packet to that interface.
If you enter
disabled
, the Annex does not scan the interface list and does not copy
broadcast packets.
ipencap_type
indicates whether the Annex LAN interface encapsulates IP packets in Ethernet
Version 2 format or IEEE 802.3 Data Link Layer format.
ipso_class specifies the U.S. Department of Defense basic IP Security Option (IPSO)
classification level included in TCP packets generated on Annex CLI, dedicated,
or adaptive asynchronous ports. The option is not added to locally generated
ICMP messages, RIP updates, or other system packets. The Annex does not
check incoming packets for the presence of the IPSO.
Type
Async
Values
+ any character
Default
+
(displays as ^S)
Lists Async Port, Flow Control
Ctrl
Ctrl S
Type
Annex
Values enabled or disabled
Default disabled
Lists
Annex Only, Basic Annex
Type Annex
Values
ethernet or ieee802
Default ethernet
Lists Annex Only, Basic Annex
Type Async
Values none, secret, topsecret, confidential, unclassified
Default
none
Lists Async Ports, Security