manualshive.com logo in svg

Bay Networks Manager, User Manual

Share
Download
Bay Networks Manager User Manual Download Page 294

am.book : ch20    2  Tue May  6 13:24:47 1997

Annex Manager User Guide

Chapter 20    Displaying Status Information

20-2

Part 4    Control and Status Commands

Displaying the Annex Status Window

Displaying the
Window

The

Annex Status

 command originates in the

Status

 menu. To display the

window:

1.

Create an Annex list in the main window.

For more information about Annex lists, see Chapter 4, Using the
Main Window.

2.

Select a single Annex from the list.

3.

Hold the mouse button on the Status menu, choose

Annex Status,

and release the mouse button.

The

Annex Status

 window appears (

Figure 20-1

). The name of the

Annex you selected appears in the window title bar.

Figure 20-1. Annex Status Window

W

ARNING

Summary of Contents for Manager









































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands