Bay Networks Manager, User Manual

Page: 456 / 488

am.book : ch22 92 Tue May 6 13:24:47 1997
Annex Manager User Guide
Chapter 22 Annex Parameters
22-92
Part 5 Reference Information
slip_no_icmp discards ICMP packets directed to the SLIP link. This parameter allows the
Annex to reduce unnecessary traffic and messages over the SLIP link.
slip_ppp_security
controls dial-up SLIP/PPP access. When
enable_security
and
slip_ppp_security
are set to
enabled
, ports configured for SLIP and PPP use the ACP security server.
The Annex determines whether CLI users are authorized to execute SLIP or PPP
commands.
slip_subnet_mask contains the Annex IP subnet mask for a SLIP interface. The subnet mask defines
which portion of the IP address is the network, subnet, and host. The parameter
default is based on the network portion of the Annex IP address. Setting this
parameter incorrectly can cause routing problems.
slip_tos allows an Annex to send interactive traffic (such as
telnet
,
rlogin
, and
ftp
control
sessions) before it sends other traffic. This parameter provides a type-of-service
based SLIP queuing.
Type
Async
Values
enabled or disabled
Default disabled
Lists
Async Port, SLIP
Type
Async
Values enabled or disabled
Default
disabled
Lists
Async Port, PPP, SLIP, Security
Type Async
Values
IP address
Default
0.0.0.0
Lists Async Port, SLIP
Type Async
Values
enabled or disabled
Default
disabled
Lists Async Port, SLIP