Bay Networks Manager, User Manual

Page: 186 / 488

am.book : ch13 2 Tue May 6 13:24:47 1997
Annex Manager User Guide
Chapter 13 Setting Security Values
13-2
Part 2 Setup Mode
Understanding the Security Window
The
Security
window divides settings into
Incoming
,
Outgoing
,
Host Access
,
and
VCLI
categories.
• The
Incoming
box controls security for incoming ports and
allows you to select a PPP security setting.
The
On
and
Off
buttons for
Modem Ports, Non-modem Ports
, and
WAN Calls
set security for the Annexes you selected in the main
window. If you select
On
, Annex Manager activates the ACP
security server, including security for AppleTalk, CLI, IPX, and
SLIP/PPP connections for the ports or calls you selected.
Modem Ports
and
Non-modem Ports
do not apply for ISDN
Primary Rate Annexes.
WAN Calls
does not apply for
Annexes with asynchronous ports.
• The
PPP Security Protocol
box defines the security check that the
Annex requires before it starts the network control protocol.
You can select:
–
None
.
–
Pap
to use password authentication protocol.
–
Chap
to use challenge-handshake protocol.
–
Chap/Pap
to request the challenge handshake protocol or to
request password authentication if the peer rejects
Chap
• Request the challenge-handshake protocol.
• Request password authentication protocol if the peer
rejects
Chap
.