am.book : ch12 3 Tue May 6 13:24:47 1997
12-3
Chapter 12 Editing Modem Definitions
Annex Manager User Guide
Part 2 Setup Mode
If the
Edit Modem
window appears with a modem name
and you enter another existing name,
Connect Status
String
,
Dialin Setup Command
and
Dialout Setup Command
do not automatically display values for the name you
entered. If you click
at this point, Annex
Manager changes the definition for the name you entered
to the values displayed in the window. You can use this
method to create a new definition with the same values as
an existing one.
•
Connect Status String
contains the string the Annex uses when it
initiates an outbound call. This string lists all successful
connect messages that the modem can return. You can enter up
to 80 status codes.
•
Dialin Setup Command
contains the command the Annex sends to
incoming modem ports before the first user connects to a port.
The command should include all modem steps required to
answer a call coming into the Annex. For example, it should
turn on the auto-answer feature and disable inbound modem
connect messages.
•
Dialout Setup Command
contains the command the Annex sends
to all serial device ports before they becomes active. This
command should contain all configuration information required
for the Annex to initiate an outbound call. For example, it
should disable the auto-answer feature and enable modem
connect messages. You can enter up to 80 characters.
•
Revert to default modem values
displays default values for a
modem when you changed the default definition.
Apply
Summary of Contents for Manager
Page 10: ...am book amTOC doc x Tue May 6 13 24 47 1997 Annex Manager User Guide Contents x ...
Page 14: ...am book amLOF doc xx Tue May 6 13 24 47 1997 Annex Manager User Guide Figures xx ...
Page 16: ...am book amLOT doc xxii Tue May 6 13 24 47 1997 Annex Manager User Guide Tables xxii ...
Page 22: ...am book pref xxviii Tue May 6 13 24 47 1997 Annex Manager User Guide Preface xxviii ...
