manualshive.com logo in svg

Bay Networks Manager, User Manual

Share
Download
Bay Networks Manager User Manual Download Page 351

am.book : ch21    5  Tue May  6 13:24:47 1997

21-5

Chapter 21    Annex Manager and SNMP

Annex Manager User Guide

Part 4    Control and Status Commands

Defining the disabled_modules Parameter

The Annex

disabled_modules

 parameter allows you to turn off certain

features during Annex software initialization (e.g., you can enter

LAT

,

PPP

,

SLIP

to turn these features off. You can use the

na

 or

admin

 tools to verify

and change

disabled_modules

. If you disabled SNMP, the Annex discards

all SNMP messages sent to it and Annex Manager is not able to retrieve
any information using SNMP. By default, the SNMP agent on the Annex
is enabled.

Defining the allow_snmp_sets Parameter

The Annex default setting for the

allow_snmp_sets

 parameter does not

permit parameter value changes because the header of the

set

 command

transmits the community string in clear text, which may be a security risk.
To allow Annex Manager to modify parameters through SNMP, you must
use the

na

 or

admin

 tools to change

allow_snmp_sets

 to

yes

. You cannot set

this parameter using SNMP.

Standard MIB Support

The Annex supports the following standard MIBs:

•

MIB-II  (defined in RFC1213).

•

Character MIBs [defined in RFCs 1316, (Character MIB), 1317
(RS232-like MIB), and 1318 (Parallel Printer MIB)].

•

Ethernet MIB (defined in RFC 1398).

•

RIPv2 MIB (defined in RFC 1389).

•

AppleTalk MIB (defined in RFC 1243).

Some standard MIB objects are not valid or meaningful for the Annex.
For detailed information, see

Annex Restrictions on Standard MIBs

on page 21-8.

Summary of Contents for Manager









































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands