Bay Networks Manager, User Manual

Page: 397 / 488

am.book : ch22 33 Tue May 6 13:24:47 1997
22-33
Chapter 22 Annex Parameters
Annex Manager User Guide
Part 5 Reference Information
CallDef_rs232_async_
data_bits defines the number of data bits in a character. This value does not include the
start, stop, or parity bits.
CallDef_rs232_async_
parity defines the parity type for asynchronous connections.
CallDef_rs232_async_
stop_bits
specifies the number of stop bits for an asynchronous connection.
CallDef_rs232_sync_
clock_source
defines the source of the bit rate clock for the connection.
Split
indicates that the
transmit clock is internal and the receive clock is external.
CallDef_short _break
allows an ISDN Primary Rate Annex to return a user to the CLI prompt after
receiving a break of less than two seconds.
Type
Annex
Values
5, 6, 7, or 8
Default 8
Lists
Annex Only, Basic Async Port, Modem, Modem Internal,
Call Defaults
Type Annex
Values
none, odd, even
Default none
Lists Annex Only, Basic Async Port, Modem, Modem Internal,
Call Defaults
Type Annex
Values
one, two, one-and-half
Default one
Lists Annex Only, Basic Async Port, Modem, Modem Internal,
Call Defaults
Type
Annex
Values clk56, clk64, clk112, clk128, external, split
Default clk56
Lists
Annex Only, Call Defaults
Type Annex
Values
enabled or disabled
Default enabled
Lists Annex Only, Idle Timer, Call Defaults