Bay Networks Manager User Manual Download Page 405

Page: 405 / 488

am.book : ch22 41 Tue May 6 13:24:47 1997

22-41

Chapter 22 Annex Parameters

Annex Manager User Guide

Part 5 Reference Information

control_lines

defines the type of hardware control lines used on this port. You can enter:

•

both

to allow flow and modem control.

•

flow_control

to allow flow control (RTS/CTS) only.

•

modem_control

to allow modem control using only DTR/DCD/

DSR handshaking.

•

none

to disable flow and modem control.

data_bits

defines the number of data bits in a character. This value does not include the
start, stop, or parity bits.

daylight_savings

allows the Annex to adjust for daylight savings time in your geographic location.

dedicated_address

defines one host and one TCP port to which this port can connect. To use this
parameter, set the

Mode

parameter to

dedicated

. .

Type

Async

Values

both, flow_control, modem_control, none

Default

none

Lists

Async Port, Flow Control, Modem, Modem Internal

Type

Annex

Values

5, 6, 7, or 8

Default

Lists

Annex Only, Basic Async Port, Modem

Type

Annex

Values

us, australian, british, canadian, east_european,
mid_european, west_european, none

Default

Lists

Annex only

Type

Async

Values

IP address

Default

0.0.0.0

Lists

Async Port, Dedicated_Port

Summary of Contents for Manager









































































































































































































































































































































































































































































































Search results

Summary of Contents for Manager

Reviews:

Related manuals for Manager

Brands by name

Popular brands

Bay Networks Manager, User Manual

Search results

Summary of Contents for Manager

Reviews:

Related manuals for Manager

Brands by name

Popular brands