Bay Networks Manager, User Manual

Page: 370 / 488

am.book : ch22 6 Tue May 6 13:24:47 1997
Annex Manager User Guide
Chapter 22 Annex Parameters
22-6
Part 5 Reference Information
at_security turns on ACP service for an AppleTalk session. When you choose
enabled
for
this parameter and for
enable_security
, the Annex uses ACP to get security
information about the client, including authentication, logging, and zone access
information. If you choose
disabled
, the Annex uses only local security.
attn _string defines a control character sequence that returns users to the CLI prompt. Users
can define a temporary control character sequence using the CLI
stty attn
command.
authoritative_agent
allows an Annex to send an ICMP Address Mask reply to a host that broadcasts
a subnet mask request.
authorized_groups specifies the LAT protocol remote group codes that are accessible to users on
an Annex port. You can enter
all
,
none
, a series of numbers separated by commas
(e.g.,
1
,
5
,
7
) or a range of numbers separated by dashes
(e.g.,
1, 5, 200-255
).
Type Async
Values
enabled or disabled
Default
disabled
Lists Async Port, AppleTalk
Type
Async
Value
+ any character, up to 16 characters
Default
“ “ (null string) or +
(for vcli connections)
Lists Async Port, Command LIne Editing, Modem, Modem
Internal
Ctrl
Ctrl A
Type Annex
Values
enabled or disabled
Default enabled
Lists Annex Only, Basic Annex
Type
Async
Values all, none, numbers between 0 and 255
Default none
Lists
Async Port, LAT