manualshive.com logo in svg

Bay Networks Manager, User Manual

Share
Download
Bay Networks Manager User Manual Download Page 384

am.book : ch22    20  Tue May  6 13:24:47 1997

Annex Manager User Guide

Chapter 22    Annex Parameters

22-20

Part 5    Reference Information

CallDef_latb_enable

allows an ISDN Primary Rate Annex to decode the LAT host data-b packets,
which change asynchronous call parameters.   Refer to the documentation of
your LAT host.

 If you enter

enabled

 and the LAT host sends a data-b slot message

requesting that flow control (XON/XOFF) be turned off, the Annex
turns off flow control and passes XON/XOFF characters to the host.
This scenario can adversely affect XON/XOFF and the terminal
cursor keys.

CallDef_line_erase

allows an ISDN Primary Rate Annex using CLI to echo line erase for a video
terminal. If you choose

enabled

, the Annex erases all characters on the line and

moves the cursor back to the beginning of the line. If you choose

disabled

, it

echoes the line erase character for hard-copy terminals, making the deleted line
visible and positioning the print head at the beginning of the next line.

CallDef_local_address

defines the IP address for the connection on the ISDN Primary Rate Annex side
of the link. This IP address is used only when

CallDef_mode

 is set to

slip

,

ppp,

or

 autodetect

.

Type

Annex

Values

enabled or disabled

Default

disabled

Lists

Annex Only, Call Defaults, LAT

Type

Annex

Values

enabled or disabled

Default

enabled

Lists

Annex Only, Call Defaults, Cmd Line Editing

Type

Annex

Values

IP address

Default

0.0.0.0

Lists

Annex Only, PPP, SLIP, Sync Call Defaults

Summary of Contents for Manager









































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands