manualshive.com logo in svg

Bay Networks Manager, User Manual

Share
Download
Bay Networks Manager User Manual Download Page 266

am.book : ch18    16  Tue May  6 13:24:47 1997

Annex Manager User Guide

Chapter 18    Comparing and Copying Parameters and Values

18-16

Part 3    Customize Mode

Using Push Buttons

Copy

 provides the following push buttons:

•

 activates the

Copy

 command based on the Annexes

and scripts you selected. When you click

, the

Confirmation

 window appears, allowing you to verify the

Copy

command. The

Reset Parameters

 window follows if you

selected

Confirm Auto Reset

 from the pull-down menu and if the

parameter values you are copying require an Annex to be reset.

•

 displays the standard

File Selection

 window, which

includes the default text directory. You can enter a file name in
the

Selection

 field and click

 to store the Output box

contents or click

 to return to the

Copy

 window.

•

displays a window that explains the

Copy

 command.

•

 removes the

Copy

 window from your display.

Copying Parameter Values

Using the Copy
Command

You can use the

Copy

 command to copy parameter values from one Annex

or port to one or more other Annexes or ports. To use this command:

1.

Create an Annex List in the main window.

Copy

 works only for reachable Annexes. For more information

about Annex lists, see Chapter 4, Using the Main Window.

2.

Move the pointer to the Configure menu and select

Copy

.

The

Copy

 window displays (see

Figure 18-5 on page 18-12

).

Apply

Apply

Save Msgs

OK

Cancel

Help

Close

Summary of Contents for Manager









































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands