am.book : ch2 18 Tue May 6 13:24:47 1997
Annex Manager User Guide
Chapter 2 Window Basics
2-18
Part 1 Annex Manager Basics
Using Check Buttons
Check buttons are marked with a small square ( ) that precedes a label.
They allow you to turn a selection on or off. You can select one or more
check buttons.
Selecting Check
Buttons
To use check buttons:
1.
Move the pointer to the square shape (
).
2.
Click the mouse button.
When you turn a selection on, the center of the square is
highlighted. When you turn a selection off, the center of the square
is empty.
3.
Move the pointer to the next check button you want to select
and repeat steps 1 and 2.
When you select more than one button, the previously selected
buttons remain highlighted.
Figure 2-4
shows the check buttons in the
Create Script
command. The
Main
Window Parameters
button is turned on.
Figure 2-4. Check Buttons
Summary of Contents for Manager
Page 10: ...am book amTOC doc x Tue May 6 13 24 47 1997 Annex Manager User Guide Contents x ...
Page 14: ...am book amLOF doc xx Tue May 6 13 24 47 1997 Annex Manager User Guide Figures xx ...
Page 16: ...am book amLOT doc xxii Tue May 6 13 24 47 1997 Annex Manager User Guide Tables xxii ...
Page 22: ...am book pref xxviii Tue May 6 13 24 47 1997 Annex Manager User Guide Preface xxviii ...
