Bay Networks Manager, User Manual

Page: 399 / 488

am.book : ch22 35 Tue May 6 13:24:47 1997
22-35
Chapter 22 Annex Parameters
Annex Manager User Guide
Part 5 Reference Information
CallDef_slip_tos allows an ISDN Primary Rate Annex to send interactive traffic (such as
telnet
,
rlogin
, and
ftp
control sessions) before it sends other traffic. This parameter
provides a type-of-service based SLIP queuing.
CallDef_tcp_keepalive specifies the length of time an ISDN Primary Rate Annex connection must be
idle before sending keep-alive messages. A keep-alive message contains no data,
but solicits an acknowledgment from the other end of a connection to determine
whether the connection is still active. If the recipient does not acknowledge the
message after eight retries, the Annex drops the connection. You can use
0
(the
Annex Manager default value) to set the keep-alive time to 120 minutes, or you
can enter
255
to disable the keep-alive mechanism.
CallDef_telnet_crlf converts a carriage return in a Telnet session to a carriage return followed by a
line feed. If you enter
disabled
, a carriage return translates to a carriage return
followed by a null string.
CallDef_telnet_escape defines the character that returns a CLI user to the
telnet
prompt. You can press
and enter
U
to disable the
telnet
escape character.
Type
Annex
Values enabled or disabled
Default
disabled
Lists
Annex Only, SLIP, Call Defaults
Type Annex
Values
0 to 255 minutes
Default
0 minutes
Lists Annex Only, Basic Annex, Call Defaults
Type Annex
Values
enabled or disabled
Default
disabled
LIsts Annex Only, Cmd Line Editing, Call Defaults
Ctrl
Type
Annex
Values
+ any character
Default
+
(displays as ^])
Lists Annex Only, Cmd Line Editing, Call Defaults
Ctrl
Ctrl ]