Bay Networks Manager, User Manual

Page: 432 / 488

am.book : ch22 68 Tue May 6 13:24:47 1997
Annex Manager User Guide
Chapter 22 Annex Parameters
22-68
Part 5 Reference Information
option_key enables AppleTalk-specific functions and parameters, the CLI
tn3270
command,
active RIP, dial-out routing, filtering, and IPX. These features are available
separately or in any combination. Each Annex requires a unique key value for
the features you choose. You must contact your supplier to obtain the key value.
output _flow_control defines the method that a device uses to start or stop output from an Annex. You
can choose:
•
none
to disable flow control.
•
start/stop
to designate flow control by recognizing xon and xoff
characters.
•
eia
to indicate that flow control is delegated to a lower level
(e.g., a parallel port).
output_is_activity defines activity as output. If you enter
enabled
, the Annex sets the inactivity timer
when it sends output from the port.
Lists Annex
Values
option key value from your supplier
Default
n/a
Lists Annex Only, Basic Annex, AppleTalk, IPX
Type Async
Values
none, start/stop, eia
Default none
Lists Async Port, Printer Port, Flow Control, Modem
Type
Async
Values enabled or disabled
Default
enabled
Lists
Async Port, Dedicated Port, Idle Timer, Modem, Modem
Internal