manualshive.com logo in svg

Bay Networks Manager, User Manual

Share
Download
Bay Networks Manager User Manual Download Page 198

am.book : ch14    10  Tue May  6 13:24:47 1997

Annex Manager User Guide

Chapter 14    Using the AppleTalk, IP, IPX, and LAT Windows

14-10

Part 2    Setup Mode

Using Push Buttons

The

LAT

window uses the

,

,

, and

push

buttons. For detailed information about these buttons, see Chapter 5,
Setup Mode Basics.

Entering LAT Window Settings

Entering Settings

You can change the fields of the

LAT

 window:

1.

Display the

LAT

 window.

2.

Enter new values for the LAT server and/or group codes.

For detailed information about the

LAT

 window, see Understanding

the LAT Window earlier in this chapter.

3.

Click

.

Annex Manager sets the new values you entered.

Apply

Restore

Help

Close

Apply

Summary of Contents for Manager









































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands