Bay Networks Manager User Manual Download Page 292

Page: 292 / 488

am.book : ch19 22 Tue May 6 13:24:47 1997

Annex Manager User Guide

Chapter 19 Booting and Resetting Annexes

19-22

Part 4 Control and Status Commands

Changing Internal Modem Status

Changing Modem
Status

You can use the

Set WAN Internal Modems

window to change modem status:

Create an Annex list and select one or more Annexes.

For more information about creating lists, refer to Chapter 4, Using
the Main Window.

Select

WAN Internal Modems

from the Configure menu.

The

Set WAN Internal Modems

window displays.

Select one or more modems from the

Modems List

box.

The system highlights your choices.

Choose the

Modem Status

you need.

If you are setting modems to

Available

, you can skip this step.

Click

Annex Manager changes status for the modems you selected.

Using Push Buttons

The

Set WAN Internal Modems

window uses the following push buttons:

•

activates the

WAN Internal Modems

command for the

modems you selected.

•

gives you the current status of each internal modem.

•

displays a window that explains the

WAN Internal

Modems

command.

•

removes the

Set WAN Internal Modems

window from

your display.

Apply

Update

Help

Summary of Contents for Manager









































































































































































































































































































































































































































































































Search results

Summary of Contents for Manager

Reviews:

Brands by name

Popular brands

Bay Networks Manager, User Manual

Search results

Summary of Contents for Manager

Reviews:

Brands by name

Popular brands