manualshive.com logo in svg

Bay Networks Manager, User Manual

Share
Download
Bay Networks Manager User Manual Download Page 252

am.book : ch18    2  Tue May  6 13:24:47 1997

Annex Manager User Guide

Chapter 18    Comparing and Copying Parameters and Values

18-2

Part 3    Customize Mode

Displaying the
Window

To display the

Compare

 window:

1.

Create an Annex List.

You must create an Annex list if you want to compare two Annexes
or an Annex and a script.  You can create a list before you display
the

Compare

window, or you can display the

Compare

 window first,

return to the main window to create the list, and choose

Compare

again.  If you want to compare two scripts, you can skip this step.

2.

Move the pointer to the Configure menu and choose

Compare.

The

Compare

 window appears.

Figure 18-1

 shows the Compare window for two Annexes.

Figure 18-1.  Compare Window

Summary of Contents for Manager









































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands