manualshive.com logo in svg

Bay Networks Manager, User Manual

Share
Download
Bay Networks Manager User Manual Download Page 395

am.book : ch22    31  Tue May  6 13:24:47 1997

22-31

Chapter 22    Annex Parameters

Annex Manager User Guide

Part 5    Reference Information

CallDef_printer_name

specifies the printer used by the print-screen function of the

tn3270

 command.

You must enter a name listed in the

/etc/printcap

 file on the remote host by the

CallDef_printer_host

 parameter. Please refer to the Remote Annex

Administrator’s Guide for UNIX for more information.

CallDef_prompt

defines the CLI prompt for an ISDN Primary Rate Annex. This parameter uses
formatting codes consisting of the percent character and a single lowercase letter.
You can combine these codes (e.g.

%a%c

), using up to 16 codes. In addition, you

can enter text that appears in the prompt as long as your entire entry does not
exceed 32 characters. You can enter:

•

%a to display

Annex.

•

% c to display a colon and a space.

•

%d to display the date and time (e.g.,

Mon Mar 14 13:59:42 1996

).

•

%i to display an Annex IP address.

•

%j to display a new line character.

•

%l to display the port location. If no location is defined, the
port number (e.g.,

port 10

)

appears.

•

%n to display an Annex name or its IP address.

•

%p to display the port number of a virtual CLI connection
number preceded by

v.

•

%r to display

port

.

•

%s to display a space.

•

%t to display the current time.

•

%u to display the user name of the port.

Type

Annex

Values

Printer name from

/etc/printcap

 file

Default

“ “ (null string)

Lists

Annex Only, Call Defaults

Type

Annex

Values

%a, %c, %d, %i, %j. %l, %n, %p, %s, %t, %u

Default

Value in

cli_prompt

parameter

Lists

Annex Only, Basic Async Port, Call Defaults

Summary of Contents for Manager









































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands