Bay Networks Manager, User Manual

Page: 418 / 488

am.book : ch22 54 Tue May 6 13:24:47 1997
Annex Manager User Guide
Chapter 22 Annex Parameters
22-54
Part 5 Reference Information
ipx_frame_type defines framing used for IPX packets on the Ethernet interface.
ipx_security controls whether IPX security is enabled on the port.
ixany_flow_control
treats any input character as a start (XON) character if output was suspended by
a stop (XOFF) character.
keep_alive_timer specifies the number of seconds that can elapse between the transmission of
identification packets during times of network inactivity. This parameter works
only for the LAT protocol. The packets serve only as notices to remote nodes
that the host services are available.
lat_key
restricts access to LAT-specific Annex commands, parameters, functions, and
the LAT protocol within the Annex. Each Annex requires a unique key value.
You must contact your supplier to obtain a LAT key. After you set the key, your
system administrator must reboot the Annex.
Type Annex
Values
raw802_3, ethernetII, ccitt802, ccitt802snap
Default
raw802_3
Lists Annex Only, IPX
Type
Async
Values
enabled or disabled
Default disabled
Lists
Async Port, IPX, Security
Type Async
Values
enabled or disabled
Default
disabled
Lists Async Ports, Flow Control
Type Annex
Values
0 to 255 seconds
Default 20 seconds
Lists Annex Only, LAT
Type
Annex
Values obtained from your supplier
Default n/a
Lists
Annex Only, LAT