am.book : ch15 7 Tue May 6 13:24:47 1997
15-7
Chapter 15 Using and Creating Parameter Groups
Annex Manager User Guide
Part 3 Customize Mode
•
overwrites parameters in an existing user defined
group. It saves the parameters in the
Work Area
box
as new
parameters, using the selected group name. For example, if you
want to add a parameter to an existing group or delete one from
it, you can display the parameters, use
or
, and choose
to store the amended
parameter group under the same group name. When you use
this button, Annex Manager asks you to verify your changes.
•
uses the parameters in the
Work Area
box
to define a
new group. When you use this button, the
Name Entry
window
displays.
•
displays a window explaining the
User-defined
Parameter Groups
command.
•
removes the
User-defined Parameter Groups
window
from your display.
Creating or Modifying a User Defined Group
You can create your own groups or modify existing ones with the
User-defined Parameter Groups
command.
Creating a Group
To create a new group:
1.
Move the pointer to the Options menu and select
User-defined
Parameter Groups
.
The
User-defined Parameter Groups
window displays (see
Figure 15-1 on page 15-4
).
2.
Select the parameters you want in the new group from the
Parameters
box and choose
.
The parameters you choose appear in the
Work Area
box
.
If you add a parameter and then decide you do not need
it in the group, select it in the
Work Area
box
and click
.
Modify
Add >>
<< Remove
Modify
Create
Help
Close
Add >>
<< Remove
Summary of Contents for Manager
Page 10: ...am book amTOC doc x Tue May 6 13 24 47 1997 Annex Manager User Guide Contents x ...
Page 14: ...am book amLOF doc xx Tue May 6 13 24 47 1997 Annex Manager User Guide Figures xx ...
Page 16: ...am book amLOT doc xxii Tue May 6 13 24 47 1997 Annex Manager User Guide Tables xxii ...
Page 22: ...am book pref xxviii Tue May 6 13 24 47 1997 Annex Manager User Guide Preface xxviii ...
