Bay Networks Manager, User Manual

Page: 448 / 488

am.book : ch22 84 Tue May 6 13:24:47 1997
Annex Manager User Guide
Chapter 22 Annex Parameters
22-84
Part 5 Reference Information
ps_history_buffer is used with the
telnet
command to indicate how much incoming data a slave port
keeps in a buffer. Incoming data is buffered continuously before, during, and
after the Telnet session. The port must be reset after you change this parameter
value.
redisplay_line defines the reprint line character for CLI users.
remote_address contains the IP address for a host at the other end of the serial line. This parameter
works only when the mode parameter is set to
autodetect
,
slip
or
ppp
.
reset_idle_time_on
defines whether input or output resets the idle timer. The idle time is the time
lapse between activity and inactivity at the device. This parameter works with
the
who
command.
Type Async
Values
0 to 32767
Default
0
Lists Async Ports, Basic Async Port
Type
Async
Values
+ any character
Default
+ (displays as ^R)
Lists Async Port, Command_Line_Editing
Ctrl
Ctrl R
Type
Async
Values IP address
Default 0.0.0.0
Lists
Async Port, PPP, SLIP
Type
Async
Values input or output
Default input
Lists
Async Port, Idle Timer