Azbil MagneW Neo PLUS, User Manual

Page: 287 / 338

Azbil Corporation Operation using HART communicator
Model MTG11A/18A, MTG11B/18B, MTG14C 7-21
7-2-5 : Totalized value setting
Displaying totalized value
Follow the procedures described below to display the actual totalized value.
Integrated reset value
Follow the procedure described below to set the integrated reset value.
1. From online menu,
Select:
1. Device setup
4. Detailed setup
2. Conf output
3. Totalizer
1. Totalizer display
Figure 7-34 will then be displayed.
Figure 7-34
2. Press F4 (EXIT) to return to the previous display.
1. From online menu,
Select:
1. Device setup
4. Detailed setup
2. Conf output
3. Totalizer
2. Totalizer restart val
Figure 7-35 will then be displayed.
Figure 7-35
2. Use the numeric keys to input a integrated reset value.
Integrated reset value is span frequency of 00000000 to 99999999.
3. Once a new value has been inputted, press F4 (ENTER).
4. After pressing F4 (ENTER) and returning to the Totalizer menu, press F2
(SEND) to transmit the change to the converter. The HART communication
will appear in the upper right hand corner while HART is communicating with
the device. The mark will disappear once communication is properly
completed.
CM2-MTG300-2001.book 21 ページ ２０１５年９月２９日 火曜日 午前１０時１４分