Azbil MagneW Neo PLUS, User Manual

Page: 182 / 338

Operation using the data setting device Azbil Corporation
5-76 Model MTG11A/18A, MTG11B/18B, MTG14C
5-7-10 : Returning to settings at shipment
SHIPPING DATA (default value) RECOVERY
Performing SHIPPING DATA RECOVERY returns the internal data settings of the
device to the settings at time of shipment.
Note that executing this operation erases the data that was set and changed by the
customer.
Perform SHIPPING DATA RECOVERY in accordance with the following procedure:
Step Procedure Screen
1 Enter MAINTENANCE MODE in accordance
with the entry into MAINTENANCE MODE (see
section 5-5-9 on page 5-36). Using the or key,
display the screen at right.
2 Press the key twice to display the screen at
right.
3 Press the key to move the cursor to the OFF
position. Then press the key to switch the
display from OFF to ON.
After the entry into CRITICAL MODE, the
screen at right appears.
4 Press the key to display the screen at right.
5 Press the key to move the cursor to the READY
position, and then keep pressing the key for
three seconds or more.
6 SHIPPING DATA RECOVER starts.
The display will change as shown on the screen at
right.
7 When SHIPPING DATA RECOVERY ends, the
data settings return to those at the time of
shipping, and then the MEASURING MODE
screen reappears.
20.0 %
> OUTPUT CHECK
MODE OFF
20.0 %
> CRITICAL
MODE OFF
20.0 %
> CRITICAL
MODE ON
20.0 %
> ROM VER.
DATE YY-MM-DD
20.0 %
> SHIPPING DATA
RECOVERY
READY
20.0 %
> SHIPPING DATA
RECOVERY
READY
20.0 %
> SHIPPING DATA
RECOVERY ON
8.8.8.8.8.8.8.8
RATE
TOTAL
%
SELF CHECK
MODE
20.0 %
01.94 m
3
/h
WP0 00069401
CM2-MTG300-2001.book 76 ページ ２０１５年９月２９日 火曜日 午前１０時１４分