Azbil MagneW Neo PLUS, User Manual

Page: 256 / 338

Operation using the data setting device Azbil Corporation
6-72 Model MTG11A/18A, MTG11B/18B, MTG14C
Checking pulse output [PULSE OUTPUT] function
Pulse output can be checked by fixing the pulse output from the converter main body
by using SFC.
Use the following procedure to check the pulse output.
Step Key Procedure SFC screen
1 Confirm that the SFC is set to
“READY”.
If it is not, press the key to
set it to “READY”.
2
or
Press the key to access the
CONFIG functions. Press the
key or key to display the
screen as shown on the right
3
or
Press the key to access the
[TOTALIZER] functions. Press the
key or key to display
the screen as shown on the right
4
Press the key to display the
screen as shown on the right.
5
Press the key, again.
The actual pulse output will be
displayed as shown on the right.
6 Enter the output value to be
checked into the screen as shown
on the right using numeric key.
CLR
( No )
CLR
( No ) SFCM00006009D
B
CONF
H
NEXT
L
PREV
B
CONF
H
NEXT
L
PREV
SFCM00006136D
SFCM00006020D
ENTER
( Yes )
NON-VOL
H
NEXT
L
PREV
ENTER
( Yes )
NON-VOL
H
NEXT
L
PREV
SFCM00006137D
ENTER
( Yes )
NON-VOL
ENTER
( Yes )
NON-VOL
SFCM00006138D
ENTER
( Yes )
NON-VOL
ENTER
( Yes )
NON-VOL
SFCM00006139D
SFCM00006140D
CM2-MTG300-2001.book 72 ページ ２０１５年９月２９日 火曜日 午前１０時１４分