Azbil MagneW Neo PLUS, User Manual

Page: 248 / 338

Operation using the data setting device Azbil Corporation
6-64 Model MTG11A/18A, MTG11B/18B, MTG14C
Checking output of contact output: [DI/DO CHECK] function
Output of the contact output can be checked from SFC.
Use the following procedure to check the output of the contact output.
Step Key Procedure SFC screen
1 Confirm that the SFC is set to
“READY”.
If it is not, press the key to set it
to “READY”.
2
or
Press the key to access the
CONFIG functions. Press the
key or key to show the screen
here to the right
3
or
Press the key to access the
CALIBRATE function, press the
key or key to display the screen
as shown on the right.
4
Press the key.
The screen shown as shown on the right
appears and you will be asked whether
you want to check the contact output.
5
or
Press the key to access the DI/
DO CHECK function. Press the
key or key to show the screen
here to the right.
Present contact output status appears.
6
Press the key and select the status
to be set.
You can select OPEN or CLOSE.
CLR
( No )
CLR
( No ) SFCM00006009D
B
CONF
H
NEXT
L
PREV
B
CONF
H
NEXT
L
PREV
SFCM00006108D
B
CONF
H
NEXT
L
PREV
B
CONF
H
NEXT
L
PREV
SFCM00006109D
ENTER
( Yes )
NON-VOL
ENTER
( Yes )
NON-VOL
SFCM00006110D
ENTER
( Yes )
NON-VOL
H
NEXT
L
PREV
ENTER
( Yes )
NON-VOL
H
NEXT
L
PREV
SFCM00006111D
MENU I
ITEM
DE CONF.
MENU I
ITEM
DE CONF.
SFCM00006112D
CM2-MTG300-2001.book 64 ページ ２０１５年９月２９日 火曜日 午前１０時１４分