Azbil MagneW Neo PLUS, User Manual

Page: 202 / 338

Operation using the data setting device Azbil Corporation
6-18 Model MTG11A/18A, MTG11B/18B, MTG14C
Example of a key sequence
DETECTOR DATA
DETECTOR DATA
DETECTOR DATA
DETECTOR DATA
DETECTOR DATA
DETECTOR DATA
DETECTOR DATA DIAMETER=2.5 A
DETECTOR DATA
DETECTOR DATA
DETECTOR DATA DETECTOR DATA
DIAMETER=1100A DETECTOR DATA DETECTOR DATA
RANGE CONFIG
MENU ITEM key
CUT-OFF=OFF RANGE CONFIG CUT-OFF=ON 10% RANGE CONFIG
CUT-OFF=ON 05% RANGE CONFIG CUT-OFF=ON 00% RANGE CONFIG
MENU ITEM key MENU ITEM key
RANGE CONFIG
RANGE CONFIG RANGE CONFIG
RANGE CONFIG
RANGE CONFIG
RANGE CONFIG RANGE CONFIG RANGE CONFIG
To other sub-functions
DETECTOR DATA
MAG XXXXXXXX EXIT CONFIG?
Magne W CONFIG DETECTOR DATA? Magne W CONFIG WORKING...
TYPE SMW TYPE NNK DUMMY=0
DIAMETER=50 A TYPE NNM
TYPE KID
TYPE SMF
DETECTOR DATA TYPE MGG TYPE SMC
300.0 mA(EX)
250.0 mA(EX)
DOWN LOAD DATA? WORKING...
DATA LOADED!
DATA LOADED!
WORKING...
DOWN LOAD DATA?
DISP=FLOW RATE
DISP=%
NO DISPLAY CUT-OFF=ON 02% CUT-OFF=ON 01%
MagneW CONFIG
WORKING...
RANGE=SINGLE
MagneW CONFIG
RANGE CONFIG?
MAG XXXXXXXX READY...
CONF key ENTER key
MENU ITEM key
*4
*4
*2
CLR key
SHIFT+CLR key
*5
ENTER key
*1
NEXT/PREV key
*3
PREV key
*3
NEXT key
*2
CLR key
*1
*2
CLR key
SHIFT+CLR key
*5
*4
MENU ITEM key
*4
Numeric key
*3
ENTER key
ENTER key
*1
*2
CLR key
CLR key
*2
NEXT/PREV key
NEXT/PREV key
MENU ITEM key
NEXT/PREV key
NEXT/PREV key
MENU ITEM key
MENU ITEM key
NEXT/PREV key
NEXT/PREV key
NEXT/PREV key
MENU ITEM key
MENU ITEM key
MENU ITEM key
MENU ITEM key
MENU ITEM key
MENU ITEM key MENU ITEM key
NEXT/PREV key
NEXT/PREV key
MENU ITEM key MENU ITEM key
Rules of interaction with screen *1: ENTER key to answer "Yes" to a question on the screen and move to one level lower in the hierarchy. *2: CLR key to answer "No" to a question on the screen and move to one level higher in the hierarchy. *3: NEXT/PREV key to select a different function in the same hierarchy. *4: MENU ITEM key to select a different item in the same hierarchy and with the same function. *5: SHIFT + CLR keys to exit the CONFIG functions from any level.
A
A
A
When display card is not found
CM2-MTG300-2001.book 18 ページ ２０１５年９月２９日 火曜日 午前１０時１４分