Azbil MagneW Neo PLUS, User Manual

Page: 197 / 338

Azbil Corporation Operation using the data setting device
Model MTG11A/18A, MTG11B/18B, MTG14C 6-13
Writing on non-volatile memory
After downloading the changed setting data using SFC, save the setting data to
MangeW Two-wire PLUS non-volatile memory in approx. 30 seconds. Therefore, do
not turn the power off during the operation.
If you want to save the data immediately, press the key and key, then the
data will be written forcibly to non-volatile memory.
Changing communication method
Two wired magnetic flowmeter has the following 4 communication methods:
• SFN.A… SFC communication (Analog)
• SFN.D… SFC communication (Digital)
• HART… HART communication
• NONE… not using any communication function
~Note
SFC communication (Digital) indicates Enhanced DE communication of
Honeywell Co.
For SFC communication, select “SFN.A”.
To change the communication method, operate using the touch keys. From the data
setting screen “COM SELECT” of “OPERATOR'S MODE”, it is required to set the
communication method to SFN.A. (Figure 6-4)
Figure 6-4 Data setting screen
SHIFT
ENTER
( Yes )
NON-VOL
* COM SELECT
SFN.A
CM2-MTG300-2001.book 13 ページ ２０１５年９月２９日 火曜日 午前１０時１４分