Azbil MagneW Neo PLUS, User Manual

Page: 244 / 338

Operation using the data setting device Azbil Corporation
6-60 Model MTG11A/18A, MTG11B/18B, MTG14C
Select pulse output / contact output [DIGITAL I/O] function
Two wired magnetic flowmeter can be configured for pulse output or contact output
other than the analog current output (4-20 mA).
Use the following procedure to configure the pulse output and contact output.
Step Key Procedure SFC screen
1 Confirm that the SFC is set to
“READY”.
If it is not, press the key to
set it to “READY”.
2
or
Press the key to access the
CONFIG functions. Press the
key or key to display the
screen as shown on the right
3
or
Press the key to access the
DIGITAL I/O function, press the
key or key to display
the screen as shown on the right.
Present setting function appears.
DO NOT USED..... Pulse output
HI-LO ALARM..... Contact output
* Following function will appear
on the screen but are not available
for two wired magnetic flowmeter.
ALARM
DIAG
EMPTY
H1-L1/H2-L2 ALM
or
4
Press the key and specify the
function to be set.
5
Press the key.
The changed setting is saved to the
SFC.
CLR
( No )
CLR
( No ) SFCM00006009D
B
CONF
H
NEXT
L
PREV
B
CONF
H
NEXT
L
PREV
SFCM00006100D
ENTER
( Yes )
NON-VOL
H
NEXT
L
PREV
ENTER
( Yes )
NON-VOL
H
NEXT
L
PREV
SFCM00006101D
SFCM00006102D
MENU I
ITEM
DE CONF.
MENU I
ITEM
DE CONF.
SFCM00006102D
ENTER
( Yes )
NON-VOL
ENTER
( Yes )
NON-VOL
SFCM00006103D
CM2-MTG300-2001.book 60 ページ ２０１５年９月２９日 火曜日 午前１０時１４分