Azbil MagneW Neo PLUS, User Manual

Page: 246 / 338

Operation using the data setting device Azbil Corporation
6-62 Model MTG11A/18A, MTG11B/18B, MTG14C
Setting contact output status [DIGITAL I/O] function
When contact output (HI-LO ALARM) is selected in the previous page, use the
following procedure to set the contact output status (OPEN/CLOSE) in NORMAL
status.
Step Key Procedure SFC screen
1 Confirm that the SFC is set to
“READY”.
If it is not, press the key to
set it to “READY”.
2
or
Press the key to access the
CONFIG functions. Press the
key or key to display the
screen as shown on the right
3
or
Press the key to access the
DIGITAL I/O function, press the
key or key to display
the screen as shown on the right.
The screen displays the setting of
the contact output status (OPEN/
CLOSE) in the actual NORMAL
status.
or
4
Press the key and select the
status to be set.
You can select OPEN or CLOSE.
5
Press the key.
The changed setting is saved to the
SFC.
6
or
Press the key or key to
show this screen.
CLR
( No )
CLR
( No ) SFCM00006009D
B
CONF
H
NEXT
L
PREV
B
CONF
H
NEXT
L
PREV
SFCM00006100D
ENTER
( Yes )
NON-VOL
H
NEXT
L
PREV
ENTER
( Yes )
NON-VOL
H
NEXT
L
PREV
SFCM00006106D
SFCM00006107D
MENU I
ITEM
DE CONF.
MENU I
ITEM
DE CONF.
SFCM00006107D
ENTER
( Yes )
NON-VOL
ENTER
( Yes )
NON-VOL
SFCM00006103D
H
NEXT
L
PREV
H
NEXT
L
PREV
SFCM00006053D
CM2-MTG300-2001.book 62 ページ ２０１５年９月２９日 火曜日 午前１０時１４分