Azbil MagneW Neo PLUS, User Manual

Page: 209 / 338

Azbil Corporation Operation using the data setting device
Model MTG11A/18A, MTG11B/18B, MTG14C 6-25
3
or
Use the key and key to
display the engineering unit to be set.
Pressing the key instead of the
key can also change the screen.
Branch:
• To exit this function, press the
key.
4
Press the key.
Result and branch:
• The engineering unit to be set is
written into the database.
Setting is completed when the screen
returns to step 2. Press the key
to return to step 1.
• When the engineering unit to be set is
mass flow rate, the setting content is
written into the database.
Go to step 5.
5 Press numeric keys to set specific
gravity.
6
Press the key. When the screen as
shown on the right appears, press the
key once again. The setting is
completed when the screen returns to
the screen as in step 2. Press the
key to return to step 1.
Step Key Procedure SFC screen
H
NEXT
L
PREV
D
UNITS
CLR
( No )
H
NEXT
L
PREV
D
UNITS
H
NEXT
CLR
( No )
SFCM00006040D
ENTER
( Yes )
NON-VOL
CLR
( No )
ENTER
( Yes )
NON-VOL
CLR
( No )
SFCM00006041D
SFCM00006042D
ENTER
( Yes )
NON-VOL
CLR
( No )
ENTER
( Yes )
NON-VOL
ENTER
( Yes )
NON-VOL
CLR
( No )
SFCM00006041D
CM2-MTG300-2001.book 25 ページ ２０１５年９月２９日 火曜日 午前１０時１４分