Azbil MagneW Neo PLUS, User Manual

Page: 190 / 338

Operation using the data setting device Azbil Corporation
6-6 Model MTG11A/18A, MTG11B/18B, MTG14C
Key
Description
Press key Press SHIFT + key
ID: Starts communication with the
converter. The display window shows
TAG No. of the converter. It is possible
to write or rewrite the TAG No. on this
screen.
Used when the
communication method is
SFN. D. Has the same
function as ID.
CONF: Used to correct the converter
or change the setting of the internal
data. This function has a hierarchical
structure. See “Hierarchical structure
of CONFIG functions” on page 6-17
for details.
No effect
DAMP: Press this key to display or
change the damping time constant of
the converter.
No effect
UNITS: Press this key to display or set
the engineering units of the flow rate
measured using the converter.
No effect
LRV 0%: Displays the lower range
value of the converter output range.
Fixed at 0.0% in the converter. The
lower range value refers to the flow
rate when the converter output
becomes 0% (4 mA DC in the case of
analog output).
No effect
URV 100%: Displays the upper range
value of the converter output range.
The upper range value refers to the
flow rate when the converter output
becomes 100% (20 mA DC in the case
of analog output).
No effect
MENU ITEM: Used to display or
select a different item located at the
same hierarchy and with the same
function.
DE CONF: Used to display
or select variables output in
digital communication using
SFN.D for communication
method.
A
ID
DE READ
B
CONF
C
DAMP
D
UNITS
LRV E
0%
URV F
100%
MENU I
ITEM
DE CONF.
CM2-MTG300-2001.book 6 ページ ２０１５年９月２９日 火曜日 午前１０時１４分