ABB Relion RES670, Technical Manual

Page: 558 / 934

Events are produced according to set event masks. The event masks are treated
commonly for both the LON and SPA communication. An
EventMask can be set
individually for each input channel. These settings are available:
• NoEvents
• OnSet
• OnReset
• OnChange
• AutoDetect
It is possible to define which part of the EVENT function generates the events. This
can be performed individually for communication types
SPAChannelMask and
LONChannelMask . For each communication type these settings are available:
• Disabled
• Channel 1-8
• Channel 9-16
• Channel 1-16
For LON communication, events are normally sent to station level at change. It is also
possible to set a time for cyclic sending of the events individually for each input
channel.
To protect the SA system from signals with a high change rate that can easily saturate
the EVENT function or the communication subsystems behind it, a quota limiter is
implemented. If an input creates events at a rate that completely consume the granted
quota then further events from the channel will be blocked. This block will be removed
when the input calms down and the accumulated quota reach 66% of the maximum
burst quota. The maximum burst quota per input channel is 45 events per second.
16.6 Disturbance report DRPRDRE
IP14584-1 v2
16.6.1 Identification
M16055-1 v8
Function description IEC 61850 identification IEC 60617
identification
ANSI/IEEE C37.2
device number
Disturbance report DRPRDRE - -
Disturbance report A1RADR - A4RADR - -
Disturbance report B1RBDR - B22RBDR - -
Section 16
1MRK 511 408-UUS A
Monitoring
552 Phasor measurement unit RES670 2.2 ANSI
Technical manual