ABB Relion RES670, Technical Manual

Page: 199 / 934

Name Values (Range) Unit Step Default Description
Characterist2 ANSI Ext. inv.
ANSI Very inv.
ANSI Norm. inv.
ANSI Mod. inv.
ANSI Def. Time
L.T.E. inv.
L.T.V. inv.
L.T. inv.
IEC Norm. inv.
IEC Very inv.
IEC inv.
IEC Ext. inv.
IEC S.T. inv.
IEC L.T. inv.
IEC Def. Time
Reserved
Programmable
RI type
RD type
- - ANSI Def. Time Time delay characteristic for step 2
Pickup2 1 - 2500 %IB 1 50 Residual current operate level for step 2 in %
of IBase
t2 0.000 - 60.000 s 0.001 0.400 Def time delay or add time delay for inverse
char of step 2
TD2 0.05 - 999.00 - 0.01 0.05 Time multiplier for the step 2 selected time
characteristic
IMin2 1.00 - 10000.00 %IB 1.00 50 Minimum operate residual current for step 2
in % of IBase
t2Min 0.000 - 60.000 s 0.001 0.000 Minimum operate time for inverse time
characteristic step 2
MultPU2 1.0 - 10.0 - 0.1 2.0 Multiplier for the residual current setting value
for step 2
HarmBlock2 Disabled
Enabled
- - Enabled Enable block of step 2 for harmonic restraint
DirModeSel3 Disabled
Non-directional
Forward
Reverse
- - Non-directional Directional mode of step 3 (Off, Non-dir,
Forward, Reverse)
Table continues on next page
1MRK 511 408-UUS A
Section 8
Current protection
Phasor measurement unit RES670 2.2 ANSI 193
Technical manual