ABB Relion RES670, Technical Manual, Page: 501 / 934

PID-6737-OUTPUTSIGNALS v2
Table 374: VNMMXU Output signals
Name Type Description
VA REAL VA Amplitude, magnitude of reported value
VA_RANGE INTEGER VAAmplitude range
VA_ANGL REAL VA Angle, magnitude of reported value
VB REAL VB Amplitude, magnitude of reported value
VB_RANGE INTEGER VB Amplitude range
VB_ANGL REAL VB Angle, magnitude of reported value
VC REAL VC Amplitude, magnitude of reported value
VC_RANGE INTEGER VC Amplitude range
VC_ANGL REAL V_C Angle, magnitude of reported value
16.1.5 Settings
SEMOD130322-4 v7
The available setting parameters of the measurement function (MMXU, MSQI) are
depending on the actual hardware (TRM) and the logic configuration made in
PCM600.
These six functions are not handled as a group, so parameter settings are only available
in the first setting group.
The following terms are used in the Unit and Description columns:
• VBase (VB): Base voltage in primary kV. This voltage is used as reference for
voltage setting. It can be suitable to set this parameter to the rated primary voltage
supervised object.
• IBase (IB): Base current in primary A. This current is used as reference for current
setting. It can be suitable to set this parameter to the rated primary current of the
supervised object.
• SBase (SB): Base setting for power values in MVA.
PID-6713-SETTINGS v3
Table 375: CVMMXN Non group settings (basic)
Name Values (Range) Unit Step Default Description
SLowLim 0.0 - 2000.0 %SB 0.1 80.0 Low limit in % of SBase
SLowLowLim 0.0 - 2000.0 %SB 0.1 60.0 Low Low limit in % of SBase
SMin 0.0 - 2000.0 %SB 0.1 50.0 Minimum value in % of SBase
SMax 0.0 - 2000.0 %SB 0.1 200.0 Maximum value in % of SBase
Table continues on next page
1MRK 511 408-UUS A
Section 16
Monitoring
Phasor measurement unit RES670 2.2 ANSI 495
Technical manual