ABB Relion RES670, Technical Manual

Page: 443 / 934

15.7.6 Pulse timer function block PULSETIMER
IP11016-1 v2
M11466-3 v3
The pulse (PULSETIMER) function can be used, for example, for pulse extensions or
limiting the operation time of outputs. The PULSETIMER has a settable length. When
the input is 1, the output will be 1 for the time set by the time delay parameter
t . Then
it returns to 0.
15.7.6.1 Function block
M11465-3 v4
PULSETIMER
INPUT OUT
IEC04000407-3-en.vsd
IEC04000407 V3 EN-US
Figure 163: PULSETIMER function block
15.7.6.2 Signals
PID-6985-INPUTSIGNALS v1
Table 270: PULSETIMER Input signals
Name Type Default Description
INPUT BOOLEAN 0 Input to pulse timer
PID-6985-OUTPUTSIGNALS v1
Table 271: PULSETIMER Output signals
Name Type Description
OUT BOOLEAN Output from pulse timer
15.7.6.3 Settings
PID-6985-SETTINGS v1
Table 272: PULSETIMER Non group settings (basic)
Name Values (Range) Unit Step Default Description
t 0.000 - 90000.000 s 0.001 0.010 Time delay of function
1MRK 511 408-UUS A
Section 15
Logic
Phasor measurement unit RES670 2.2 ANSI 437
Technical manual