Toshiba e-Studio477s Скачать руководство пользователя страница 229 | Manualshive

Страница: 229 / 482

Toshiba e-Studio477s Скачать руководство пользователя страница 229

© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved

e-STUDIO477S/527S/477SL

REPLACEMENT OF PC BOARDS/HDD

6 - 15

6

[C] Print out “FUNCTION” list

(1) Press the [USER FUNCTIONS] button.

(2) Press the [ADMIN] button, enter the password, and then press the [ENTER] button.

Notes:

Explain the procedure to the user (machine administrator) and ask him/her to enter his/her
password.

(3) Press the [LIST/REPORT] button and then the [LIST] button.

(4) Press the [FUNCTION] button. The “FUNCTION LIST FOR MAINTENANCE” is printed out.

[D] Erase HDD

In case of the ADI-HDD:

(1) Turn the power ON while pressing [4] and the [CLEAR] button simultaneously.

(2) Key in [1] to select "1: Revert factory install status HDD." and then press the [START] button.

(3) Turn the power OFF.

[E] Replace / Format HDD

(1) Confirm that the power is turned OFF.

(2) Replace the HDD.

(Refer to

P. 6-5 "6.1.4 Hard disk (HDD)".)

(3) Create the partitions on the HDD.

1.Turn the power ON while pressing [3] and [CLEAR] button simultaneously.
2.When “Firmware Assist Mode” appears on the LCD, key in [3] to select “3: Format HDD” and
then press the [START] button.
3.When “Operation Complete” is displayed on the LCD, creating of the partitions is completed.

(4) Turn the power OFF.

(5) Format the service tech password.

1. Turn the power ON while pressing [3] and the [CLEAR] button simultaneously.
2. When "Firmware Assist Mode" appears on the LCD, key in [8] to select "8. Clear Service Tech
Password" and then press the [START] button.
3. When "Reset Complete" is displayed on the LCD, formatting of the service tech password is
completed.

(6) Turn the power OFF.

(7) Update the system software using the USB device.

See “8.2Firmware Updating with a USB Device” for details.

(8) Turn the power OFF.

(9) When the Fax Unit (GD-1340) is installed, perform “Fax Set Up” (1*-100) and “Clearing the

image data” (1*-102). Then turn the power OFF.

Notes:

When “Clearing the image data” (1* - 102) is performed, the image data in the printer will also be
cleared.

(10) Start up with the Setting mode (08).

«
...
227
228
229
230
231
...
»

Содержание e-Studio477s



































































































































































































































































































































































































































































































Отзывы:

Нет отзывов