manualshive.com logo in svg

Toshiba e-Studio477s, Руководство по обслуживанию, Страница: 2 / 482

Поделиться
Скачать
Toshiba e-Studio477s Скачать руководство пользователя страница 2

Trademarks

• The official name of Windows

®

 Vista is Microsoft Windows Vista Operating System.

• The official name of Windows

®

 7 is Microsoft Windows 7 Operating System.

• The official name of Windows

®

 8.1 is Microsoft Windows 8.1 Operating System.

• The official name of Windows

®

 10 is Microsoft Windows 10 Operating System.

• The official name of Windows Server

®

 2008 is Microsoft Windows Server 2008 Operating System.

• The official name of Windows Server

®

 2012 is Microsoft Windows Server 2012 Operating System.

• Microsoft, Windows, Windows NT, and the brand names and product names of other Microsoft 

products are trademarks of Microsoft Corporation in the US and other countries.

• Apple, AppleTalk, Macintosh, Mac, Mac OS, Safari, iPhone, iPod touch, TrueType, AirPrint, AirPrint 

logo, and iPad are trademarks of Apple Inc.

• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used 

under license.

• Adobe, Acrobat, Reader, and PostScript are trademarks or Adobe Systems Incorporated.
• Mozilla

®

, Firefox

®

 and the Firefox logo

®

 are trademarks or registered trademarks of Mozilla 

Foundation in the U.S. and other countries.

• IBM, AT and AIX are trademarks of International Business Machines Corporation.
• NOVELL

®

, NetWare

®

 and NDS

®

 are trademarks of Novell, Inc.

• FLOIL

®

 is a registered trademark of Kanto Kasei CO., Ltd.

• MOLYKOTE

®

 is a registered trademark of Dow Corning Corporation.

• KAPTON

®

 is a registered trademark of E. I. du Pont de Nemours and Company.

• Sankol

®

 is a registered trademark of SANKEIKAGAKU CO.,Ltd.

• e-STUDIO, e-BRIDGE, and TopAccess are trademarks of Toshiba Tec Corporation.
• Other company names and product names in this manual are the trademarks of their respective 

companies.

© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved

Under the copyright laws, this manual cannot be reproduced in any form without prior written permission 
of TOSHIBA TEC CORPORATION.

Содержание e-Studio477s



































































































































































































































































































































































































































































































Отзывы:

Нет отзывов