manualshive.com logo in svg

Toshiba e-Studio477s, Руководство по обслуживанию, Страница: 47 / 482

Поделиться
Скачать
Toshiba e-Studio477s Скачать руководство пользователя страница 47

3

© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved

e-STUDIO477S/527S/477SL

SELF-DIAGNOSTIC MODE

3 - 23

3.11 File System Recovery Mode (5C)

3.11.1

Overview

This is a mode to check if there is any damage to the file system (HDD) and recover it if necessary. Use 
this mode only in the following cases:.

• There is a possibility of damage to the file system (HDD).
• There is an apparent damage to the file system (HDD), requiring recovery or initialization.

This mode enables you to have the following functions:
• Check F/S: Checks the file system.
• Recovery F/S: Recovers the file system.
• Initialize HDD: Initializes partitions in the HDD.
• Initialize DB: Initializes database (LDAP DB/log DB/language DB).
• SMART Info: Displays the various information in the HDD.
• DISK Info: Displays the usage rate of HDD.
• HDD Utility: Initializes log files.

3.11.2

Operation procedure

Notes: 

• Do not turn the main power switch OFF after you select a menu and processing has started 

(during processing).

• After the processing is completed, a beep sounds 4 times and either "Completed" or "Failed" 

appears on the screen.

Turn ON the power while pressing the [5] and [CLEAR] button simultaneously. The following screen is 
displayed.

Fig. 3-14

Remarks: 

When the mode is started, "1. Check F/S" is selected by default. 
(">" is displayed on the left of the selected number.)

[5][C]

[POWER]

[POWER] OFF/ON

(Exit)

[Digital key]

(Selection)

[Digital key]

(Selection)

[START]

(HDD formatting)

[START]

(DB formatting

such as log data)

File System(F/S) Recovery Mode -> Check F/S

        Please Select Mode

>1. Check F/S
  2. Recovery F/S
  3. Initialize HDD
  4. Initialize DB
  5. SMART Info
  6. DISK Info
  7. HDD Utility

Содержание e-Studio477s



































































































































































































































































































































































































































































































Отзывы:

Нет отзывов