manualshive.com logo in svg

Toshiba e-Studio477s, Руководство по обслуживанию, Страница: 324 / 482

Поделиться
Скачать
Toshiba e-Studio477s Скачать руководство пользователя страница 324

e-STUDIO477S/527S/477SL

© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved

BACKUP FUNCTION

9 - 6

9.2

AES Data Encryption Function Setting

9.2.1

General description

Data encryption is a function that encrypts data in the HDD to enhance the security. 
Note that this function may affect the equipment performance. 

9.2.2

Precautions

When the data encryption function is set enabled, data currently stored in the HDD will not be retrieved. 
Therefore when data encryption function needs to be enabled after the installation of the equipment, it 
is necessary to back up the data in the HDD before setting this function and then recover them after the 
setting.

• To ensure security, ask the user (machine administrator) to back up or restore the user’s data 

and information in the HDD. A service technician can back up or restore them only when the 
user (machine administrator) permits it.

• Some data in the HDD cannot be backed up and can be left only on printouts.

When the data encryption function is enabled, the following items are restricted.

• 08-9112 (Auto Shut Off Mode timer setting (Sleep Mode)) is automatically set to “20: Not 

used”.

• 08-9113 (Screen setting for automatic energy saver/automatic power OFF) is automatically 

set to “0: OFF”.

• When the [ENERGY SAVER] button is pressed on the control panel, the equipment does not 

enter the sleep mode.

• Since the energy saver mode cannot be set using the control panel, set it in TopAccess. 

However, the setting of “Sleep/Auto Shut Off” cannot be changed in TopAccess and “Disable” 
is displayed.

Содержание e-Studio477s



































































































































































































































































































































































































































































































Отзывы:

Нет отзывов