Toshiba e-Studio477s Скачать руководство пользователя страница 299

Страница: 299 / 482

e-STUDIO477S/527S/477SL

FIRMWARE UPDATING

8 - 11

(6) Select the item with the digital keys.

“*” is displayed next to the selected item. Display or delete the “*” by pressing the number of the
item.

Notes:

The display of items on this screen varies depending on the updating method.

(7) Press the [START] button.

Updating starts and the processing status is displayed on the LCD screen.

Notes:

The display of items on this screen varies depending on the updating method.

(8) When a standard update is completed properly, "Update successfully completed Restart the

MFP" is displayed at the bottom of the LCD screen.

Notes:

When a patch update is completed, "Patch Update Successfully Restart the MFP" is displayed at
the bottom of the LCD screen.

Patch and Normal package in one folder
of USB Storage

When both the system and patch
update packages are in a USB
device together.

Item

Remarks

1. SYSTEM FIRMWARE(OS Data)

Updating System firmware

2. ENGINE FIRMWARE

Updating PU firmware

3. SCANNER FIRMWARE

Updating SU firmware

4. SYSTEM SOFTWARE (HD Data)

Updating System software

Status display during the update

Status display when the update is completed

SYSTEM FIRMWARE(OS Data) update in
progress

SYSTEM FIRMWARE(OS Data) Completed

ENGINE FIRMWARE update in progress

ENGINE FIRMWARE Completed

SCANNER FIRMWARE update in progress

SCANNER FIRMWARE Completed

SYSTEM SOFTWARE (HD Data) update in
progress

SYSTEM SOFTWARE (HD Data) Completed

Error

number

Error message

Cause

Содержание e-Studio477s


























































































































































































































































































































































































































































































Результаты поиска

Содержание e-Studio477s

Отзывы:

Toshiba e-Studio477s, Руководство по обслуживанию, Страница: 299 / 482

Результаты поиска

Содержание e-Studio477s

Отзывы: