Toshiba e-Studio477s, Руководство по обслуживанию, Страница: 349 / 482

e-STUDIO477S/527S
05/08 Mode Element Sub Element Item Subitem Code
Sub-
Code
Details
Default
value
Acceptable
value
RAM Contents
Proc
edure
ServiceUI
05 High density The larger the value, the darker the image of the
area surrounding the target area becomes.
Adjustment
mode
Image
Processing
Gamma
balance
adjustment
SCN(black) Gray scale 7488 2 128 0~255 4 SYS
05 Amount of surrounding void When the value increases, the blank area around
the scanned image becomes wider. (e.g.: In
network scanning with 600 dpi, if the setting value
is "1", the blank area increases by 1 dot.)
Adjustment
mode
Image
Processing
Image NW scanning 7489 0 0~255 1 Yes SYS
05 Text/photo The larger the value, the darker the image at the
center value becomes.
Adjustment
mode
Image
Processing
Density
adjustment
FAX(black) Manual
adjustment/Center
value
7533 128 0~255 1 SYS
05 Text The larger the value, the lighter the image at the
center value becomes.
Adjustment
mode
Image
Processing
Density
adjustment
FAX(black) Manual
adjustment/Center
value
7534 128 0~255 1 SYS
05 Photo The larger the value, the darker the image at the
center value becomes.
Adjustment
mode
Image
Processing
Density
adjustment
FAX(black) Manual
adjustment/Center
value
7535 128 0~255 1 SYS
05 Text/photo The larger the value, the darker the image
becomes.
Adjustment
mode
Image
Processing
Density
adjustment
FAX(black) Automatic density
adjustment
7542 128 0~255 1 SYS
05 Photo The larger the value, the darker the image
becomes.
Adjustment
mode
Image
Processing
Density
adjustment
FAX(black) Automatic density
adjustment
7543 128 0~255 1 SYS
05 PPC/SCN The larger the value, the more the original tends to
be judged as a blank page.
Adjustment
mode
Image
Processing
Blank page
judgment
threshold
adjustment
7618 128 0~255 1 Yes SYS
05 PPC/SCN The larger the value, the more the original tends to
be judged as black even in the auto color mode.
The smaller value, the more it tends to be judged
as color.
Adjustment
mode
Image
Processing
ACS judgment
threshold
7630 70 0~255 1 Yes SYS
05 Default setting This code is used to change the width of fine lines
in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets whether automatic stroke
adjustment is enabled or disabled if it is not
included in the print data. If this setting is disabled,
there will be an increase in cases in which the
width of fine lines becomes thicker by 1 dot when
they are printed.
0: Disabled
1: Enabled
2: Forcibly disabled (Ignores command in printing
data)
3: Forcibly enabled (Ignores command in printing
data)
Adjustment
mode
Image
Processing
Stroke
adjustment
PS/PDF
automatic stroke
adjustment
600dpi 8239 0 1 0~3 4 SYS
9 Ver03 05 Adjustment Mode