manualshive.com logo in svg

Toshiba e-Studio477s, Руководство по обслуживанию, Страница: 245 / 482

Поделиться
Скачать
Toshiba e-Studio477s Скачать руководство пользователя страница 245

© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved

e-STUDIO477S/527S/477SL

REPLACEMENT OF PC BOARDS/HDD

6 - 31

6

(5) Install the one-time dongle in the equipment (the one which you used for uploading the selected 

license), and then press the [OK] button.

(6) The Remove screen is displayed. Then press the [YES] button.

If this screen is not displayed, check that the one-time dongle is installed in the equipment 
properly.

(7) After 10 to 40 seconds have passed, the screen for notifying the success of the performance is 

displayed. Then press the [OK] button.
If the screen for notifying a failure of the performance is displayed, quit this operation by pressing 
the [CLOSE] button. Then check that the one-time dongle, which you used for uploading the 
selected license, is installed in the equipment.

(8) Check that the returned license is not displayed on the screen. 

Remarks: 

If there are any other licenses to be returned, repeat from step (4). 
If there are no other licenses to be returned, press the [CLOSE] button, and then turn the power 
OFF.  

(9) Replace the equipment. 

(10) Turn the power ON while pressing [0] and [8] simultaneously.  

(11) Enter the password, and then press the [OK] button. 

(If the password is not set for Service, press the [ENTER] button without entering anything.)

(12) Key in [3840], and then press the [START] button.

(13) Press the [INSTALL] button.  

(14) Install the one-time dongle in the equipment (the one which you used for returning the selected 

license before replacing the equipment). Then press the [OK] button. 

(15) Select the license to be installed, and then press the [INSTALL] button. 

(16) The screen for notifying that the installation will be started is displayed. Then press the [YES] 

button. 

(17) After 10 to 40 seconds have passed, the screen for notifying the success of the performance is 

displayed. Then press the [OK] button. If the screen for notifying a failure of the performance is 
displayed, quit this operation by pressing the [NO] button. Then check that the one-time dongle is 
installed properly in the equipment.

(18) Check that the installed license is displayed on the license list. 

Remarks: 

If there are any other licenses to be installed, repeat from step (13). If there are no other licenses 
to be installed, press the [CLOSE] button, and then turn the power OFF. 

Содержание e-Studio477s



































































































































































































































































































































































































































































































Отзывы:

Нет отзывов