Toshiba e-Studio477s Скачать руководство пользователя страница 78 | Manualshive

Страница: 78 / 482

Toshiba e-Studio477s Скачать руководство пользователя страница 78

e-STUDIO477S/527S/477SL

© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved

SELF-DIAGNOSTIC MODE

3 - 54

3.15 Batch Setting for Self-Diagnostic Codes

3.15.1

General description

The setting files encrypted in which each setting value has been written can be stored in a USB storage
device. Installing this USB storage device in the equipment and reading a setting file enables the batch
setting for the self-diagnostic codes.
• After the batch setting is performed, a result file is stored in the USB storage device.
• A maximum of 100 codes can be set in one file. If a code has sub codes, each of them is counted as

one code.

Notes:

This function is not available if an automatic execution script such as a log collection is stored in
a USB storage device.

3.15.2

Applicable codes

This function is available for the codes, whose values can be set by the service technicians, in the 05,
08 and 13 modes.

Notes:

• The codes only displaying the values and the ones acquiring or clearing the values by

automatic execution are not included.

• When a value of the code which exchanges another one sequentially is changed, another one

is altered in conjunction with it.

• Setting of the codes 08-8911 and 08-9000 is not possible.

3.15.3

Setting files

[ 1 ] Setting files

An encrypted file in which the setting values for each code to be changed is written in an XML format.
A maximum of 100 codes can be set in one file. If a code has sub codes, each of them is counted as
one code.

File name: DIG_SET.diag
File format: xml format

Notes:

• A setting file has to be encrypted by a dedicated encryption tool to be stored in a USB storage

device.

• A setting file has to be located in the root folder of a USB storage device.
• No other automatic execution script has to be located in the root folder of a USB storage

device.

[ 2 ] Example

<Policy>

<Data>

<Category-05/>
<Category-08>

<Code>

<MainCode>3807</MainCode>
<Value>1</Value>

</Code>
<Code>

<MainCode>9240</MainCode>
<Value>2</Value>

</Code>
<Code>

<MainCode>9264</MainCode>
<SubCode>1</SubCode>

«
...
76
77
78
79
80
...
»

Содержание e-Studio477s



































































































































































































































































































































































































































































































Отзывы:

Нет отзывов