manualshive.com logo in svg

Toshiba e-Studio477s, Руководство по обслуживанию, Страница: 228 / 482

Поделиться
Скачать
Toshiba e-Studio477s Скачать руководство пользователя страница 228

e-STUDIO477S/527S/477SL

© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved

REPLACEMENT OF PC BOARDS/HDD

6 - 14

[A] Back up in HDD

Ask the user (machine administrator) to back up the data in the HDD. Refer to the table below for the 
type of data, availability and method of backup. 

[B]  Print out “FUNCTION LIST FOR MAINTENANCE”

(1) Enter the Service Mode. “3.2Service UI”

(2) Select "FAX LIST PRINT MODE" and then press [NEXT].

(3) Select "Function list for Maintenance" and then press [PRINT].

Type of data in HDD

Availability

Backup method

Image data in the e-Filing

Available

Archive them in the “e-Filing” of 
TopAccess. As for the backup in Box 
data, all data (selectable by the box) 
can be backed up / restored in one 
go by using “e-Filing Backup/Restore 
Utility”.

F-code information, Template 
registration information, Address 
book data

Available

Back them up in the “Administrator” 
menu of TopAccess.

Department management data

Available

Export them in “Administrator” menu 
of TopAccess.

Log data (Print, Scan, FAX 
(Transmission/Reception)

Available

Export them in the “Administrator” 
menu of TopAccess. (Import cannot 
be performed.)

Data in the shared folder (Scanned 
data, Saved data of copy / FAX 
transmission)

Available

Copy them to the client computer via 
the network. (The data which have 
been copied to
the client computer cannot be copied 
to the shared folder.)

Print waiting data (Copying data and 
FAX reception data that are waiting 
to be printed due to
the paper run-out and jam, etc.)

Not available

Finish printing them after supplying 
paper or releasing the jam, etc. (The 
data cannot be left.)

Print job (Private print data, Schedule 
print data)

Not available

If any jobs are left, print them. (The 
data cannot be backed up.)

FAX saved data (Confidential / 
Bulletin board data)

Not available

Print them. (The data cannot be 
backed up.)

Registration data for FAX 
transmission (Delayed transmission / 
Recovery transmission)

Not available

Print them. (The data cannot be 
backed up.)

Содержание e-Studio477s



































































































































































































































































































































































































































































































Отзывы:

Нет отзывов