manualshive.com logo in svg

Toshiba e-Studio477s, Руководство по обслуживанию, Страница: 292 / 482

Поделиться
Скачать
Toshiba e-Studio477s Скачать руководство пользователя страница 292

e-STUDIO477S/527S/477SL

© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved

FIRMWARE UPDATING

8 - 4

8.2

Firmware Updating with a USB Device

To update the firmware, store the update program and the firmware data files in a USB device.
The update program is "signatures.sig", and it needs to be stored in a USB device. It is necessary for 
updating the firmware except that of the system firmware.
For the data file for each firmware, refer to the table of section 8.2.2Firmware type and data file name 
for updating.

Notes: 

Be sure to use the latest program when updating is performed.

8.2.1

Updating methods

There are three types of updating methods by means of a USB device. The table below explains the 
differences.

8.2.2

Firmware type and data file name for updating

[A] Standard update
Equipment

[B] Differential items update
Equipment

Method

File

Explanation

Standard update

Standard package

Updating the file of a base version.

Differential items 
update

Differential items 
package

Updating the version by means of the package of only the 
files which have been changed from the base. This 
method is applied to the system firmware only. Since only 
the files which have been changed are packaged, the 
data size is smaller than that for the standard package.

Patch update

Patch

Updating can be done in a shorter time than the standard 
one. This method is applied to the system firmware and 
the system software only.

Firmware

Stored

Data file name

Display

System firmware 
(OS data)

System control PC 
board 
(SYS board)

T290SF0Wxxxx.tar
* The version name comes 

at "xxxx".

SYSTEM FIRMWARE
(OS Data)

PU firmware

PU PC board

T292PUPWWxxxx.tar
* The version name comes 

at "xxxx".

ENGINE FIRMWARE

SU firmware

SU PC board 

T292SUPWWxxxx.tar
* The version name comes 

at "xxxx".

SCANNER FIRMWARE

System software
(HDD program 
data)

HDD

T290HD0Wxxxx.tar
* The version name comes 

at "xxxx".

SYSTEM SOFTWARE 
(HD Data)

Firmware

Stored

Data file name

Display

System firmware

System control 
PC board 
(SYS board)

T290SFdWxxxx.tar
* The version name comes at 

"xxxx".

SYSTEM 
FIRMWARE(OS Data)

System software

HDD

T290HDdWxxxx.tar
* The version name comes at 

"xxxx".

SYSTEM SOFTWARE 
(HD Data)

Содержание e-Studio477s



































































































































































































































































































































































































































































































Отзывы:

Нет отзывов