Tascam Sonicview 16, Справочное руководство

Страница: 115 / 188

7 – Other module parameter setting screens
4
Module name
o
This shows the module name and user module name for
the selected bus. If the user module name has not been
defined, the module name will be shown as “FX 1”, for
example.
o
Tap the user module name area to open the MODULE
NAME Screen where the user module name and set
module color can be changed. (See “MODULE NAME
screen” on page 122.)
5
button
Tap this button to open the SEND OVERVIEW menu for the
selected FX 1–4 bus.
Tap menu items to change parameter settings for the
selected FX 1–4 buses. (See “SEND OVERVIEW menu” on page
118.)
6
Page selection buttons
Tap a page selection button to open that page.
The selected button will be highlighted.
Button Use
SEND LEVEL (INPUT)
This shows a list of SEND levels
from the CH 1–40 and ST IN 1–2
modules to the FX 1–4 buses.
SEND LEVEL (BUS)
This shows a list of SEND levels
from the MIX 1–22 modules to
the FX 1–4 buses.
ON / OFF (INPUT)
This shows a list of assignment
on/off states from the CH 1–40
and ST IN 1–2 modules to the FX
1–4 buses.
ON / OFF (BUS)
This shows a list of assignment
on/off states from the MIX 1–22
modules to the FX 1–4 buses.
PRE / POST (INPUT)
This shows a list of signal send
positions from the CH 1–40 and
ST IN 1–2 modules to the FX 1–4
buses.
SEND PAN (INPUT)
This shows a list of pan/balance
settings from the CH 1–40 and
ST IN 1–2 modules to the FX 1–4
buses.
SEND PAN (BUS)
This shows a list of pan/balance
settings from the MIX 1–22
modules to the FX 1–4 buses.
7
SEND levels
o
This shows a list of setting states for SEND levels from the
CH 1–40 and ST IN 1–2 modules to the FX 1–4 buses.
o
When a selection frame is shown, use corresponding LCD
knobs (lit green) to adjust SEND levels.
Range: - ∞ dB - +10 dB (default: - ∞ dB)
8
FX INPUT LEVEL
This adjust the input level for the FX 1–4 module that
corresponds to the FX 1–4 bus shown.
Range: - ∞ dB - +10 dB (default: 0.0 dB)
When the selection frame is shown, turn LCD knob 8 (lit blue)
to adjust it.
NOTE
This is the same parameter as the FX RTN 1–4 module INPUT
LEVEL knob (
7
) (“MODULE (FX) Screen” on page 90).
9
SEND levels
o
This shows a list of setting states for SEND levels from the
MIX 1–22 modules to the FX 1–4 buses.
o
When a selection frame is shown, use corresponding LCD
knobs (lit green) to adjust SEND levels.
Range: - ∞ dB - +10 dB (default: - ∞ dB)
0
ON/OFF buttons
o
This shows a list of assignment on/off states from the CH
1–40 and ST IN 1–2 modules to the FX 1–4 buses.
o
Tap these buttons to switch on/off assignments to FX 1–4
buses. (Default: ON)
When ON, buttons will be highlighted.
q
ON/OFF buttons
o
This shows a list of assignment on/off states from the MIX
1–22 modules to the FX 1–4 buses.
o
Tap these buttons to switch on/off assignments to FX 1–4
buses. (Default: ON)
When ON, buttons will be highlighted.
w
PRE/POST buttons
o
This shows a list of signal send position settings from the
CH 1–40 and ST IN 1–2 modules to the FX 1–4 buses.
o
Tap these buttons to switch settings for send positions to
FX 1–4 buses. (See “15 - Block diagram” on page 175.)
Display Explanation
PRE Pre-fader
POST (default) Post-fader
Tap the buttons to switch their send positions.
e
PAN/BAL for CH 1–40 and ST IN 1–2 modules
This shows a list of setting states for pan/balance from the CH
1–40 and ST IN 1–2 modules to the selected FX 1–4 buses.
Display range: L100 – C – R100 (default: C)
NOTE
FX 1–4 bus SEND PAN parameters are always linked to the
PAN/BAL settings of the corresponding modules (PAN LINK
setting is always on). They are shown dimly and cannot be
operated on this screen.
TASCAM Sonicview 16/Sonicview 24
115