Tascam Sonicview 16 Скачать руководство пользователя страница 149

Страница: 149 / 188

9 – Various information displays

Error/alert type

Message

Meaning

Note

Prohibited Setting Alert

Clock master changed to Internal.
IF-AE16 cannot be clock master.

Even though an IF-AE16 cannot

be selected as the master clock,

it was, so the master clock was

changed to “INT”.

This could occur upon startup if

the SLOT card set as the master

clock was switched to an IF-

AE16 or IF-AN16/OUT when the

power was off.

Clock master changed to Internal.
IF-AN16/OUT cannot be clock

master.

Even though an IF-AN16/OUT

cannot be selected as the master

clock, it was, so the master clock

was changed to “INT”.

Slot Card Alert

SLOT [slot number] [card name]

installed.

An expansion card was installed

while the power was off.

Slot number: 1/2
Card name:

IF-AE16 (AES)

IF-AN16/OUT (Analog Out)

IF-DA64 (Dante)

IF-MA64/BN (MADI)

IF-MA64/EX (MADI)

SLOT [slot number] was changed

from [old card name] to [current

card name].

The expansion card was changed

while the power was off.

Internal Dante Alert

Dante I/O Sample rate changed by

Dante Controller.

The internal Dante input/output

sampling frequency was changed

by Dante Controller.

Storage Media Alert

Unrecognized format (SD card).

An SD card with a format that

cannot be recognized was loaded.

Unrecognized format (USB

memory).

A USB flash drive with a format

that cannot be recognized was

loaded.

Record Alert

Recording stopped.
Media Full.

The medium did not have enough

capacity, so recording stopped.

Recording error.
Buffer overflow.

Recording stopped because a

buffer overflow occurred during

recording.

Recording stopped.
File limit reached.
Please change to another folder.

Recording stopped because

the total number of files would

exceed the system limit.

Recording error.
SD card was removed.

Recording stopped because the

SD card was disconnected during

recording.

Play Alert

Play error. Buffer underrun.

Playback stopped because a

buffer underrun occurred during

playback.

Play error.
[Media name] was removed.

Playback stopped because the

media was disconnected during

playback.

Media name:
SD card
USB

TASCAM Sonicview 16/Sonicview 24

149

Содержание Sonicview 16





























































































































































































Результаты поиска

Содержание Sonicview 16

Отзывы:

Похожие инструкции для Sonicview 16

Бренды по названию

Популярные бренды

Tascam Sonicview 16, Справочное руководство

Результаты поиска

Содержание Sonicview 16

Отзывы:

Похожие инструкции для Sonicview 16

Бренды по названию

Популярные бренды